Hot wash cycles depend on a working heating element, and on commercial washers running frequent hot cycles for hygiene-sensitive laundry — hospitals, hotels, gyms — a failed element means water that never reaches the required temperature, no matter how the cycle is set.
Signs You Need Heating Element Repair
- Water stays cold or lukewarm on hot wash settings
- Wash cycle takes longer than usual trying to reach temperature
- Error code referencing a heating fault
- Element visibly discoloured, blistered or corroded
- Burning smell during a hot cycle
- Circuit breaker tripping specifically during hot washes
What's Involved
We test the heating element for continuity and check for any earth leakage, which often trips a breaker even before the element fully fails. Elements that have corroded, cracked or burned out are replaced with a correctly rated commercial part, and we also check the thermostat and temperature sensor at the same time, since a faulty sensor can cause a perfectly good element to underheat or overheat.
Common Causes
Heating elements corrode over time from constant exposure to water and detergent, and mineral-heavy water supply — common in parts of Kenya — accelerates scale buildup on the element, reducing its efficiency and eventually causing failure.
Why Choose Washing Machines Tech
We test the whole heating circuit — element, thermostat and sensor — rather than assuming the element alone is at fault, so hygiene-critical hot washes are properly restored.
Cold water on a hot cycle isn't just an inconvenience for hygiene-sensitive laundry — it's a compliance issue. Get the heating element checked promptly.