Getting a new commercial washer or dryer installed correctly matters just as much as keeping it repaired — a poorly installed machine can develop premature faults, vibrate excessively, or fail to meet its rated performance from day one. Proper installation covers plumbing connections, electrical requirements, ventilation, leveling and load-bearing considerations that vary by machine type and building setup. Washing Machines Tech installs commercial laundry equipment across hotels, laundromats and serviced properties, making sure new machines start their working life set up correctly.
What We Cover
Our installation service includes:
- Water supply and drainage connections
- Electrical hookup and circuit verification
- Gas line connection for gas-fired equipment
- Ventilation and exhaust routing for dryers
- Leveling and vibration-dampening setup
- Initial test cycles and performance checks
Key Installation Considerations
Water pressure and supply — commercial washers need adequate water pressure and supply line sizing to fill efficiently, and undersized plumbing leads to slow fills and inconsistent wash quality.
Drainage capacity — commercial-scale water volume needs drainage lines sized to handle it, and inadequate drainage can cause backups, especially when several machines drain into shared plumbing.
Electrical load requirements — commercial machines, particularly dryers, often need dedicated circuits with specific voltage and amperage ratings, and getting this wrong risks tripped breakers or damaged components.
Gas line safety — gas dryers require correctly sized and properly sealed gas connections, installed to safety standards, since a poor connection is a genuine hazard rather than just a performance issue.
Ventilation routing — dryer exhaust needs a clear, appropriately sized path to the outside, and poor routing during installation causes drying performance issues that persist until it's corrected.
Leveling and stability — an unlevelled machine vibrates excessively during spin or extraction cycles, accelerating wear on bearings and suspension components from the very first use.
Why Choose Us
Installation done right the first time prevents a whole category of faults that would otherwise show up as repair call-outs months later. Our technicians install according to manufacturer specifications and local building requirements, checking water pressure, drainage capacity, electrical load and ventilation before declaring a job complete — not just bolting a machine in place and connecting the hoses.
We also run initial test cycles as part of every installation, confirming the machine performs to its rated specifications rather than leaving that discovery to the first paying customer or guest.
Installing new commercial laundry equipment? Contact Washing Machines Tech for professional installation done right the first time.
A correctly installed machine is the foundation of reliable long-term performance, and that's where we start every new equipment job.